Alliant Pro Reach is a relatively new propellant gaining popularity among reloaders. This powder, designed for use in various calibers, offers unique performance characteristics. Understanding its load data and optimizing its use is crucial for safe and accurate shooting. This comprehensive guide dives into Alliant Pro Reach load data, exploring its strengths, weaknesses, and best applications. We'll examine various calibers, providing insights to help you achieve optimal results. Remember always to consult your reloading manual and follow safety precautions.
Understanding Alliant Pro Reach's Unique Properties
Alliant Pro Reach is a relatively fast-burning extruded powder. This characteristic makes it suitable for a range of pistol and rifle cartridges. Its extruded nature contributes to consistent burning rates, resulting in improved accuracy and reduced pressure variations. The powder's burn rate and the ability to handle higher pressures makes it ideal for certain applications.
Key Characteristics:
- Extruded Powder: Leads to more consistent burning rates compared to spherical powders.
- Fast-Burning: Ideal for pistol calibers and some rifle rounds.
- High-Density: Allows for more powder in a given case volume, potentially leading to higher velocities.
- Versatility: Works well in various calibers with appropriate load data.
Alliant Pro Reach Load Data: A Caliber-Specific Look
This section will explore Alliant Pro Reach load data for several popular calibers. It is crucial to remember that this is for informational purposes only. Always refer to your reloading manual and Alliant's official data before attempting any reloading.
9mm Luger Load Data
The 9mm Luger is a common cartridge where Pro Reach excels. Its relatively fast burn rate translates well to this caliber. However, optimal load development is still key.
| Bullet Weight (grains) | Pro Reach (grains) | Velocity (fps) (Approximate) | Pressure (PSI) (Approximate) | Notes |
|---|---|---|---|---|
| 115 | 4.0 | 1050 | 35,000 | Starting Load |
| 115 | 4.5 | 1100 | 37,000 | Mid-Range Load |
| 124 | 4.2 | 1000 | 34,000 | Starting Load |
| 124 | 4.7 | 1050 | 36,000 | Mid-Range Load |
Important Note: These are approximate values. Always consult the latest data from Alliant Powder and your reloading manual. Always start at the minimum charge and work up gradually, carefully monitoring pressure signs.
.45 ACP Load Data
The .45 ACP is another popular choice for Pro Reach. Its burn rate provides good accuracy and consistent performance.
| Bullet Weight (grains) | Pro Reach (grains) | Velocity (fps) (Approximate) | Pressure (PSI) (Approximate) | Notes |
|---|---|---|---|---|
| 200 | 5.5 | 850 | 32,000 | Starting Load |
| 200 | 6.0 | 900 | 34,000 | Mid-Range Load |
| 230 | 5.8 | 800 | 31,000 | Starting Load |
| 230 | 6.3 | 850 | 33,000 | Mid-Range Load |
Disclaimer: These are estimates. Always use the most up-to-date load data from Alliant Powder and your reloading manual. Never exceed maximum listed pressures.
Other Calibers
Alliant Pro Reach can be used in other pistol and even some rifle calibers. However, accurate and up-to-date load data from Alliant is essential. Experimentation without proper information can be extremely dangerous. Always consult a reputable reloading manual and Alliant's official load data before attempting to reload with this powder.
Safety First: Reloading Precautions
Reloading ammunition is inherently dangerous. Failure to follow proper safety procedures can lead to serious injury or death.
- Always wear safety glasses and hearing protection.
- Use a properly calibrated scale to weigh your powder charges.
- Never exceed the maximum listed charge weight.
- Inspect each cartridge carefully before firing.
- Start at the minimum charge and work up gradually.
- Pay attention to pressure signs. Excessive pressure can cause damage to your firearm and lead to serious injury.
- Consult multiple sources for load data. Never rely on a single source.
Conclusion: Optimizing Your Alliant Pro Reach Loads
Alliant Pro Reach offers a promising option for reloaders seeking consistent and accurate performance. However, its effective use requires careful attention to detail, a thorough understanding of load data, and a steadfast commitment to safety. Always prioritize safety and consult reliable resources before attempting to reload any ammunition. Remember to always consult your reloading manual and Alliant's official load data before attempting any reloading. Safe and responsible reloading practices are essential for a positive experience.